-- Days remaining until the Machinery Regulation comes into force. Are you ready? Contact us.

We manufacture and install automatic gates mainly for the residential user. We use CE marked products to automate the gate but we are unsure as to whether we need to CE mark the installation as a whole as it is a fixed installation. Please advise. Open

Loading...
0

The supplier of the completed installation is responsible for delivering a Declaration of Conformity/Performance which certifies that the completed installation complies with the applicable directives, visit our Electromagnetic Compatibility (EMC) Directive page, Low Voltage Directive page, Machinery Directive page and Construction Products Regulation (CPR) page.

Most, but not all of the issues which arise when dealing with the compliance of systems such as this will be dealt with by the use of CE marked systems and components. Nevertheless, the installer still has to take responsibility for the installation as a whole and this will include ensuring that the electrical and mechanical safety of the installation complies with the relevant standards. Mechanical safety is likely to be the most significant burden, since the forces involved in the opening and closing of a mechanical gate have the potential to cause serious injury to the user. The machinery and construction products standards mandate requirements for the maximum forces and reliability of protection systems used to control the gate and hence prevent accidents from taking place.

Read more about our CE Marking for Machinery services which now include advice and consultancy services for UKCA Marking for Machinery

Last updated: 2021-07-06 14:34

I
Posted  5 years  ago by  Ilonapie
#65 778 views Edited  4 years  ago

You must be logged in to post an answer

How Can We Help You?

Ask a question, or request a callback.
Please type your full name.

Invalid Input

Invalid email address.

Invalid Input

Invalid Input

Invalid Input

Please make a selection

Invalid Input

From time to time we would like to send you our newsletter. If you consent to us contacting you for this purpose please tick the following box. (Privacy Policy)
From time to time we would like to send you our newsletter. If you consent to us contacting you for this purpose please tick the following box. <a href="/privacy-policy-and-cookies-statement" target="_blank">(Privacy Policy)</a>
Invalid Input