Published 28/10/26
The EU Machinery Regulation (EU) 2023/1230 takes effect from 20th January 2027; therefore, all machinery placed on the EU market after this date must be compliant with it.
If you are procuring your machine from Europe (or further afield), you must ensure the EU Declaration of Conformity (DoC) supplied with it states the Machinery Regulation (EU) 2023/1230.
If you are placing new machines on the market (or putting them into service) in the UK and are intending on CE marking them, then you should also be working to the Machinery Regulation (EU) 2023/1230.
Have you updated your Declarations to state the Machinery Regulation (EU) 2023/1230?
Until 19th January 2027, your machinery declaration can cite both the outgoing Machinery Directive (2006/42/EC) and upcoming Machinery Regulation (EU) 2023/1230 if you meet both sets of requirements.
From 20th January 2027, the outgoing Machinery Directive 2006/42/EC must be removed from the declaration, for machinery placed on the market from this date. This assumes, as a manufacturer, you have ensured compliance of your machinery to the new requirements in the new regulation.
This applies to both Declarations of Conformity for complete machinery and related products, and Declarations of Incorporation for Partly Completed Machinery (PCM).
If you are a manufacturer of machinery, have you assessed what the implications of the Machinery Regulation (EU) 2023/1230 are and how they affect your machinery?
Remember, this affects the sub-categories covered by the machinery legislation, i.e.:
- ‘complete’ machinery;
- Partly Completed machinery (PCM);
- Interchangeable equipment;
- Safety components;
- Lifting accessories;
- Chains, ropes and webbing;
- Removeable mechanical transmission devices;
Three of the specific changes, i.e. new requirements, are:
i) A new Essential Health and Safety Requirement (EHSR 1.1.9) addressing ‘Protection from Corruption’ – whilst aimed at cyber security considerations, especially internet connectivity, it is still applicable to any intended external connections.
ii) Mandatory certification through an EU Notified Body (or UK Approved Body) for certain types of machinery, such as machines using Artificial Intelligence or for Vehicle Service Lifts, amongst others.
iii) Manufacturers must include digital contact information, either a web address, email address or barcode (e.g. QR code), preferably on the machine itself, but if this is not possible, on a document accompany the machine, or on its packaging.In addition, instructions and Declarations may be downloadable but paper copies must still be made available on request.
There are further changes in the regulation, but how these affect each specific type of machine will be different, dependent on the nature of that machine.
Additional information can be found on our website here: https://www.conformance.co.uk/ce-legislation-information/machinery-regulation
However, if you require further support, please get in touch! We can offer a variety of guidance and support packages, tailored to your specific needs.
